Automobile Guide

   Home > Auto Guide

The Absolute Basics of Transmission Maintenance

Regular transmission maintenance is needed to keep your car running efficiently and smoothly. A number of services are carried out during routine transmission maintenance to make sure all parts are properly lubricated and in sound and solid form. A lift inspection may show any major trouble, whereas general inspection as well as replacement of filters, fluids and gaskets will show other minor issues that can be repaired as you go along.

Changing the Pan Gasket

Among the first steps to regular transmission maintenance will be to change the pan gasket. This gasket is situated around the lip or rim of the transmission pan. This gasket is situated around the lip or rim of the transmission pan. This gasket can get worn and also cracked with time, resulting in transmission fluid leaks. Transmission fluid loss can cause the car to shift incorrectly, which may bring about risky driving conditions or other related mechanical conditions.

Changing Transmission Filter

The transmission filter along with the old seal, ideally, will have to be replaced. Dirty transmission filters can cause undue wear and stress on a transmission. Changing of this filter is one of the crucial areas of transmission maintenance, however, may be easily ignored. Just like the pan gasket, it is a relatively simple and affordable replacement and needs to be under control as the transmission pan is off.

Cleaning as well as Removal of Grime

Accumulation of fluid, grime and dirt can cause problems too. Part of a regular transmission maintenance service is clean up and removal of any of this sludge. All components need to be wiped free from any kind of debris that has collected with time. This cleanup involves the transmission pan, gasket if need be, transmission case, sealing surface, and any fluid which may tend to drip your exhaust system while carry out the job.

Transmission Fluid

Because a lot of the transmission fluid was washed out and drained all through the process of changing gaskets and filters, fluid volumes will have to be returned to factory suggested levels. This is generally done through the dipstick tube situated near the engine, as well as performed after all required components are changed and the transmission is bolted to the car. It's strongly recommended to follow manufacturer instruction when choosing changing transmission fluid.

Among the simplest steps you can take to keep your transmission cool as well as extend its life is to make use of a transmission fluid additive on a consistent basis. Transmission fluid additives have special coolants made to decrease the temperature of your transmission, especially when it is under strain or pressure from stop and then go traffic, driving a car on hilly terrain or having excess weight. These additives can be bought at most car supply stores. For best quality efficiency, have your vehicle's cooling system examined twice annually by a licensed mechanic that is familiar with the maintenance of transmissions and repair.

Maintain The Regular Check-ups

Never forget the other parts of your car which could use the regular check-up. From examining the tire pressure to ensuring all taillights switch on bright, these easy routine checks will make your car safe and sound to drive while making you a safe driver for some other motorists on the highway.


 

© Copyright Automobile101.com. All rights reserved.